 |
|
|
|
 |
 |
||
 |
 |
||
Aluminised Material
| Heat Screen Designed with many uses in mind. Will withstand direct heat up to 1000ºF on one side while protecting against radiant heat up to 2000ºF on the aluminised side. Can be used with exhaust wrap and locking ties to protect driver areas and where exhaust pipes run close to fuel tanks. |
 |
| 010401 | RADIANT MATTING 36" X 40" | ||
| 010401B | HEAT SCREEN BY THE YARD | ||
| Versa-Shield - Universal
Heat Originally designed to prevent starters from heat. Can also be used to protect carburetors, fuel pumps and many more. Will withstand temperature up to 400ºF and will reflect up to 1500ºF. Easily cut into shape and attaches using Velcro. |
 |
| 010402 | 7" X 24" | |||
| Reflect-A-Cool A reflective material with a self adhesive backing. Offers protection against radiant heat where a lightweight material is needed. Pliable and easily installed, will reflect up to 1000ºF and protect against a continuous temperature of 400ºF. Ideal for firewalls. |
 |
| 010412 | 48" X 36" | |||
| Heat Resistant Sealant An adhesive for use around areas that are exposed to extreme heat. Performs continuously at -85ºF to +500ºF with intermittent exposure to 600ºF. Ideal for securing DEI Heat Screen (part no. 010401) or anywhere you need to bond two surfaces around heat. |
 |
| 010410 | 3oz TUBE | |||
| Protect-A-Boot Designed to protect spark plug boots and wires from extreme radiant temperatures created by headers and exhaust manifolds up to 1200ºF. Easy to install and fits most boots whether straight or at a 90º angle |
 |
| 010501 | PACK OF 2 | ||
| 010502 | PACK OF 8 | ||
| Lower Gear Shifter Boot Designed to protect the shifter mechanism from direct heat and moisture while helping to keep transmission and exhaust heat from rising into the vehicle. A one inch flange allows for mounting the Lower Shifter Boot through the floor. The silicone coated fiberglass cloth offers protection up to 600ºF. |
 |
| 010411 | LOWER GEAR SHIFTER BOOT | |||
| Air Intake Tube Cover Kit Designed to reflect heat away from the air intake tube. Can decrease intake temperatures up to 30%. Will reflect heat away from the air tube and allow cooler air to be introduced to the intake tract for a denser air/fuel charge. Installed and removed in seconds. |
 |
| 010417 | 36" LONG X 14" WIDE | ||
| 010409 | ALUMINIUM PLUG WIRE SHEATH 3/4" X 6" (4 PACK) | ||
| 010500 | UNDER HOOD COOL KIT | ||